|
Ram Horns ??
1 Attachment(s)
When I acquired my 64, it had a set of crappy rusted headers already installed, they look bad, and they hang pretty low.
I want to replace them. I have found, that I can get a set of cast iron aftermarket ram horn style manifolds, for a comparable price. I have a mild 350 4 BBL, that I'm happy with, no need for high performance. Also the cast manifolds should eliminate any clearance problems as well. Does anyone make a transition pipe to get from the ram horn manifolds , down under the truck ? Any comments or suggestions?? https://www.summitracing.com/parts/sum-g9200n/overview/ |
Re: Ram Horns ??
These have been known to work and come with the flanges, just cut as short as needed tack weld for fit and weld out when your happy:
https://www.speedwaymotors.com/Tight...teel,1722.html I don't know if these pre made units will fit the cross-member - https://pypesexhaust.com/i-12200745-...rn-dcc10s.html |
| All times are GMT -4. The time now is 08:29 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com