![]() |
What Trans Dipstick and Tube?
Guys,
What are you using for the transmission dipstick and tube for a 65 5.3 with a 4l60e? Thanks |
Re: What Trans Dipstick and Tube?
I'm planning to use the one I got from the transmission's donor, a 2008 1500 Silverado. I haven't mounted the cab yet though but wasn't anticipating any problems.
|
Re: What Trans Dipstick and Tube?
Yeah I was just wondering what's wrong with the stock one......is it a clearance issue?
|
Re: What Trans Dipstick and Tube?
When I got my motor and trans (2003 Tahoe, 5.3 Flex, 4L60E) the dipstick tube had been broken at the mounting tab that goes under the transmission bolt. I got a new one from a GM dealer and used the original dip stick.
It has cleared the cab and A/C unit on my 85 C10 with no issue. |
Re: What Trans Dipstick and Tube?
Thanks guys, I don't have one and was wondering what worked on the 60-66 models.
|
Re: What Trans Dipstick and Tube?
I've had the regular truck version and the van version. Same thing just the length difference. The truck version hides away a bit, the van version is easier to check without leaning over all the way, but sticks out over the passenger side a bit.
|
Re: What Trans Dipstick and Tube?
1 Attachment(s)
I used an fbody, it puts the handle tight to the passenger side of the motor.
Can you see the red handle?? |
Re: What Trans Dipstick and Tube?
When you do get a dipstick it should read full when the fluid is even with the pan gasket.
|
All times are GMT -4. The time now is 09:02 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com