The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)

- - MT Auto power brake assembly (https://67-72chevytrucks.com/vboard/showthread.php?t=781772)

tom7254

02-19-2019 12:34 PM

Auto power brake assembly

Need automatic power brake assembly (pedal) for a 1966 K20, or other year if it works. Tom

1960chevypanel

02-19-2019 03:53 PM

Re: Auto power brake assembly

Same pedal for manual and power as far as I know. The pedal pad is different, says Power Brake.

tom7254

02-19-2019 06:14 PM

Re: Auto power brake assembly

Is the pedal pad wider or same width. If same would I just have to remove clutch pedal arm and pad?

1960chevypanel

02-19-2019 06:32 PM

Re: Auto power brake assembly

Same width. Not like in some vehicles where the brake pedal is wider on automatics. I would pull out the whole pedal assembly and put it on a bench, from there it's fairly easy to see how to eliminate the clutch pedal.

tom7254

02-19-2019 10:08 PM

Re: Auto power brake assembly

Thanks for the info. Tom

1960chevypanel

02-20-2019 01:24 AM

Re: Auto power brake assembly

No sweat.

pimpston65

02-20-2019 08:17 PM

Re: Auto power brake assembly

Quote:

Originally Posted by tom7254 (Post 8470040)

Thanks for the info. Tom

Did you need the “power brake” pedal? Cuz I have a few extra repops

tom7254

02-20-2019 11:24 PM

Re: Auto power brake assembly

I’ll probably remove clutch pedal and use existing brake pedal. If I go the other route I’ll contact you. Tom

pimpston65

02-21-2019 12:13 AM

Re: Auto power brake assembly

Quote:

Originally Posted by tom7254 (Post 8470976)

I’ll probably remove clutch pedal and use existing brake pedal. If I go the other route I’ll contact you. Tom

dbchevy65

02-21-2019 12:30 AM

Re: Auto power brake assembly

Quote:

Originally Posted by pimpston65 (Post 8470858)

Did you need the “power brake” pedal? Cuz I have a few extra repops

Hi I’m interested in a few of your power brake pads. I pm you. Thanks

GMCNUT

02-21-2019 06:32 PM

Re: Auto power brake assembly

Quote:

Originally Posted by 1960chevypanel (Post 8469758)

Same pedal for manual and power as far as I know. The pedal pad is different, says Power Brake.

Tom, the difference is a welded on metal piece intended to make the pedal sit lower to the floor - hence the name "low pedal" power brakes. So, the arms are and are not the same. Are in that they are cast the same as one another, but the PB one gets modified after that casting to be a PB arm. Hope that makes sense.

1960chevypanel

02-21-2019 11:50 PM

Re: Auto power brake assembly

Quote:

Originally Posted by tom7254 (Post 8470976)

I’ll probably remove clutch pedal and use existing brake pedal. If I go the other route I’ll contact you. Tom

I think Pimpston was just offering you the pad here, not the whole pedal. If you want a pad that says Power Brake on it.

pimpston65

02-22-2019 12:01 AM

Re: Auto power brake assembly

Quote:

Originally Posted by 1960chevypanel (Post 8471656)

I think Pimpston was just offering you the pad here, not the whole pedal. If you want a pad that says Power Brake on it.

yes that is correct, just the pad. thanks for the catch 1960chevypanel. but if the whole assembly is needed i have an extra one.

pimpston65

02-22-2019 12:03 AM

Re: Auto power brake assembly

Quote:

Originally Posted by dbchevy65 (Post 8471021)

Hi I’m interested in a few of your power brake pads. I pm you. Thanks

did you want the pad or the whole assembly?

tom7254

02-22-2019 07:00 PM

Re: Auto power brake assembly

How much for whole assembly.

pimpston65

02-22-2019 07:10 PM

Re: Auto power brake assembly

Quote:

Originally Posted by tom7254 (Post 8472185)

How much for whole assembly.

let me go pull it to make sure all is there, free just cover shipping once i have it in my hands.

tom7254

02-22-2019 07:11 PM

Re: Auto power brake assembly

pimpston65

02-25-2019 05:33 PM

Re: Auto power brake assembly

Quote:

Originally Posted by tom7254 (Post 8472192)

the setup is from a manual with the clutch pedal removed, i thought is came as an auto.

tom7254

02-25-2019 07:19 PM

Re: Auto power brake assembly

Thanks for looking.

All times are GMT -4. The time now is 07:29 PM.