fuse block and relay for harness ?source
 

I know you can build your own fuse block with relays to go on a stand alone wiring harness but are they available to buy already built?

Re: fuse block and relay for harness ?source
 

Check out LT1swap.com. Brendan lays everything out for you.

Re: fuse block and relay for harness ?source
 

Second that. I used him to flash PCM and his videos to and pin charts to clean up my harness. No issues!

Re: fuse block and relay for harness ?source
 

I don't know of a source for a pre-built fuse block. What I bought is a weatherproof fuse block/relay block on Amazon: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

The fuse block that Brendan at LT1Swap uses has bussed terminals, but the one I got doesn't unfortunately. I went with the one from Amazon as it's a wateproof enclosure and has a lot more space and is a complete unit. I'll be using two standalone buss bars with my setup so I don't have to struggle with crimping more than 1 wire onto each terminal at the fuses and relays. One for grounds and one for power.

Re: fuse block and relay for harness ?source
 

Like this? http://www.currentperformance.com/sh...erelay-module/ It's kind of a $125 solution to a $30 problem, but they do look nice.

Re: fuse block and relay for harness ?source
 

BP Automotive also makes what appears to be the same fuse block as the one LS1Nova added. I got their harness and am happy with the quality but it is not installed yet.

Re: fuse block and relay for harness ?source
 

For the relays i mount under the hood i used these from Racetronics. They are good quality sealed weatherpak.
https://www.racetronix.biz/product.asp?ic=rycs-001

For the fuse block i mounted under the dash i used this one.
https://www.racetronix.biz/product.asp?ic=fbk-001

And for a junction box i used this.
https://www.racetronix.biz/storeitems.asp?cc=junct-00