The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Warp in door panel (https://67-72chevytrucks.com/vboard/showthread.php?t=786046)

Ad Cam

05-01-2019 09:51 PM

Warp in door panel

1 Attachment(s)

I'm thinking about repainting my door panels. Each of the door panels has a warped area, perhaps from being in the Nevada heat for 40 years. Can this be fixed? Any thoughts?

PAWS 72

05-02-2019 02:54 AM

Re: Warp in door panel

Maybe it could be heated up and flattened back out. Take a heat gun and warm it up and set a couple blocks on it and see if that does the trick.

dagnabbitt

05-02-2019 05:38 PM

Re: Warp in door panel

I just tried the heat gun on my own, it just made it worse. I would try to make a form for it to press into if I were to do it again. Good luck, though.

All times are GMT -4. The time now is 07:02 AM.