Let's see your favorite rear fuel tank filler options
 

As I get closer to making this pile of parts look like a truck, I need to get a rear tank going. Filling through the bed seems easiest to manage, but there are many cool options. Post your favorites below!

Re: Let's see your favorite rear fuel tank filler options
 

Cool through-the-bed option made to blend in:

Re: Let's see your favorite rear fuel tank filler options
 

I dig the magnets ^^^

Here's my panel access to under floor filler neck.

PS: Don't worry folks; the filler neck is not inside the cargo area, just the door to access it below the floor.

Re: Let's see your favorite rear fuel tank filler options
 

I just order this one. Came in last night. Looks sharp.

http://www.tanksinc.com/index.cfm/pa...rod/prd475.htm

Re: Let's see your favorite rear fuel tank filler options
 

Mines in the fender.

Re: Let's see your favorite rear fuel tank filler options
 

Looks clean!

Re: Let's see your favorite rear fuel tank filler options
 

We went with a fairly simple filler.

Re: Let's see your favorite rear fuel tank filler options
 

From the local marine supply...

Re: Let's see your favorite rear fuel tank filler options
 

The '50 pickup I did. The other plate is a battery access cover.

Re: Let's see your favorite rear fuel tank filler options
 

On my 1940 Ford. Both stainless inserts are flush with top of wood.

Re: Let's see your favorite rear fuel tank filler options
 

I put mine in the stake pocket of my fleetside.
https://live.staticflickr.com/1947/4...e4f8eed42b.jpg
https://live.staticflickr.com/1925/4...6a57344e98.jpg

Re: Let's see your favorite rear fuel tank filler options
 

Since my suburban gas tank's fill neck bends to the right of my rear truck fender, I bought a Harley Davidson gas cap and mounted it to the right rear fender. It mounts flush, pushes in and screws tight.

Re: Let's see your favorite rear fuel tank filler options
 

similar to idbeast, truk has the filler door in the fender
as a tall guy i sort of wish i had put it in the top of the fender
looked like a great location on sawhorses :D

Re: Let's see your favorite rear fuel tank filler options
 

I like how you did the wood on top of the side bed supports, how did you secure the wood to the bed support?

Re: Let's see your favorite rear fuel tank filler options
 

Fords are different from Chevies, at least in 1940 they are. Plus it's back halfed. There's a 1"x1/8" steel frame work under the wood. Just pre drilled holes in the supports and screwed the wood down from below. I didn't want any bolt heads showing above.

Re: Let's see your favorite rear fuel tank filler options
 

Although I'm mostly a Chevy guy I really like the looks of the 1940/41 Ford pick ups

Re: Let's see your favorite rear fuel tank filler options
 

I went around the backside of the fender. I’d recommend moving it up an inch or two to make the fuel angle a little steeper. This is a slow fill.

Re: Let's see your favorite rear fuel tank filler options
 

I've been getting questions about how I have my filler neck inside the cargo area. Again, THE FILLER NECK IS NOT INSIDE THE CAB - ONLY THE ACCESS DOOR! The filler neck is below the floor, the cap is sealed and the tank vented into a wheelwell. While I may look like I huff gas fumes all day, I assure you I don't.

Re: Let's see your favorite rear fuel tank filler options
 

You guys have seen this kit?

https://www.chevsofthe40s.com/images...rge/lhrsck.jpg

Re: Let's see your favorite rear fuel tank filler options
 

ran from dallas to nashville, with a guy that had this. he hated it, had to unload 80% of his truck each time he fueled. he had a bbc that sucked gas to boot, he fueled 3x to my one tank

Re: Let's see your favorite rear fuel tank filler options
 

here's mine. old fuel door from an scrap envoy. door was flat to start with. a little fun getting the shape on the fender and the perimeter ring cut from the donor.

Re: Let's see your favorite rear fuel tank filler options
 

hey ogre, did you use the stock spare tire carrier mounts or custom fab a new one. wondering the diameter of the tire you use as well. looks good. my spare tire mount is long gone but will fab something if I can't find a good used one. may not work with my box anyway. my tires will be 235/60r17, so 28.1" tall. hope the spare fits without hitting the cab.
I always thought your truck was a cool design, a truck with a trunk. cool.

Re: Let's see your favorite rear fuel tank filler options
 

Thanks so much bud. your bed wood came out very nice

Re: Let's see your favorite rear fuel tank filler options
 

I can understand that.

You could split the board at one of the cross-sills. You would have to do the whole bed length.

Re: Let's see your favorite rear fuel tank filler options
 

that bed filler on the green truck looks really showy, great for a low use unit I guess. very tiddly looking. my truck will be a daily driver if I ever get it done before I have to surrender my lic, haha. I plan to use the box for stuff so the fender mounted gas door is a must for me. besides, we get snow up here and it is one more way to get water in the tank when filling. sure looks good though.