The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Reassembling steering column (https://67-72chevytrucks.com/vboard/showthread.php?t=793687)

Awann99

09-19-2019 07:44 PM

Reassembling steering column

I recently pulled apart a 68-70 no tilt steering column to repaint it and I can’t get it to go back together. Does anyone have a link to a page that shows in detail and with photos on how to reassemble it? I can’t get the mounting for the turn signal switch to sit right. Thanks.
Posted via Mobile Device

Wrenchbender Ret

09-19-2019 08:38 PM

Re: Reassembling steering column

The potmetal piece under the switch has grooves in the bottom. These must match up to the mast jacket & fit with it. Then turn the hub till the holes line up & install the switch.

George

All times are GMT -4. The time now is 07:35 AM.