Source or part# 69 C20 HO52 5 bolt pinion flange gasket?
 

Resealing the HO52 in my 69 CST20. Not finding a gasket for the pinion flange anywhere. Thought I would be able to just use RTV, not possible, the mating surfaces will not come together the way the flange is machined without a gasket. I’ll just buy some gasket material and make my own if one is not available. Thought I would give this a shot to see if any of you might know of a source and part number for that gasket.

Steve weim55 Colorado

Re: Source or part# 69 C20 HO52 5 bolt pinion flange gasket?
 

Nothing wrong with making one. That's what I had to do for my axle flange/brake backing plate gaskets on my Dana 44 rear end.

Re: Source or part# 69 C20 HO52 5 bolt pinion flange gasket?
 

It will take some extra thick gasket material. The gasket has to fill in the gap between the flange & housing. The original is a thick cork gasket.
George