The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)
-   -   which front brake calipers (https://67-72chevytrucks.com/vboard/showthread.php?t=798892)

67bullet 12-30-2019 03:24 PM

which front brake calipers
 
I installed a ssbc 6 lug disc brake conversion kit # a126-71 on my 67 swb,I have replaced almost every component in the system twice,I have bleed the brakes a hundred times.I finally put a 72 master cylinder which I bleed twice, and a dual diaphragm 8 inch booster from summits on it.It will stop ok but it will not lock up the brakes.every part in the rear brakes is new,It has an adjustable proportioning valve,So I am looking for a set of calipers.The instructions says it takes D-368 brake pads.The center to center bolts on the calipers,look to be 5 3/4 of an inch I just crawled under the truck and did not remove the wheels.any info would be appreciated.this engine has 22 inches of vacuum.Thanks Jeff

67bullet 12-31-2019 09:53 AM

Re: which front brake calipers
 
Anyone know what calipers may fit this setup

dennislbrooks 12-31-2019 10:25 AM

Re: which front brake calipers
 
As far as more standard sizes for calipers I have found 7.00", 5.50", and 5.25, and 3.25 for caliper mount centers.

You might take a look at speedway disc brake brackets for an idea or maybe call your kit supplier.

I would expect rears to lockup before front, maybe more rear pressure, maybe too much traction.

67bullet 12-31-2019 11:09 AM

Re: which front brake calipers
 
ssbc has gone under,out of buisness

67bullet 12-31-2019 11:11 AM

Re: which front brake calipers
 
thanks dennislbrooks for the reply

dennislbrooks 12-31-2019 11:48 AM

Re: which front brake calipers
 
I take you have disc/drum and not disc/disc. And were referring to the front calipers?

dennislbrooks 12-31-2019 11:53 AM

Re: which front brake calipers
 
1991 Chevrolet C1500 and others -- look on ebay for D-368 brake pads and what they say they are for. Not sure if they are the calipers.


If correct, Rockauto shows many calipers for the c1500 -- looks like metric.

67bullet 12-31-2019 01:51 PM

Re: which front brake calipers
 
yes they are disc/drum and yes its the front calipers

67bullet 01-02-2020 06:55 PM

Re: which front brake calipers
 
This brake conversion says to be the same as a 1991 k 1500 with standard chassis,ok does anyone know where I can find a set of larger calipers, centerline measurement on bolts 5.750 or a disc brake bracket to fit 6 lug stock spindale for a 67 and the aftermarket calipers.Thanks Jeff

mgchevyparts 01-02-2020 07:29 PM

Re: which front brake calipers
 
Your calipers are 1988-91 Chevy/GMC 1500 light duty (not extended cab) 2.5" piston
4301/4302 are common part numbers for the calipers.
You can't just change calipers without making at minimum new brackets, essentially you need to re-design an entire kit.
Those calipers are plenty adequate for your truck. You have a problem in the hydraulic delivery, AKA master-booster-possibly your plumbing or AIR in system
You should be using a 1 1/8" bore master, although a 1" will also work but with too much pedal travel.

67bullet 01-02-2020 07:55 PM

Re: which front brake calipers
 
Ok thanks MGCHEVYPARTS

mgchevyparts 01-02-2020 07:58 PM

Re: which front brake calipers
 
What size tires are you running?

67bullet 01-02-2020 08:03 PM

Re: which front brake calipers
 
Fronts are 245 60 x 15/rears are 275 60 x 15.mickey Thompson s/t all around

mgchevyparts 01-02-2020 08:36 PM

Re: which front brake calipers
 
Ok, I was concerned you might have the big 33" tires, those kill braking power.


All times are GMT -4. The time now is 08:27 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com