The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Chevy and BOP transmissions (https://67-72chevytrucks.com/vboard/showthread.php?t=799921)

Acavet 01-21-2020 09:46 PM

Chevy and BOP transmissions
 
1 Attachment(s)
I recently purchased a nice 4x4 frame that came with a TH350 trans. The trans of course was intended to hook to a transfer case. I intend to run a solid axle front end without the differential. I’m having trouble locating a tail cone for the trans but ran across a cheap B.O.P 350. My question is would the tail cone and shaft fit my Chevy transmission?

mongocanfly 01-21-2020 11:02 PM

Re: Chevy and BOP transmissions
 
welcome..
i have no idea what a b.o.p. trans or engine is...but you have to have a 2wd output shaft as well ...be much easier to just find a 2wd trans...especially if you don't know the condition of what you have...

v30crewcab 01-21-2020 11:14 PM

Re: Chevy and BOP transmissions
 
only difference in the bop is the bellhousing. but you have to take the trans completely apart to change the tailshaft to a 2wd one.

v30crewcab 01-21-2020 11:21 PM

Re: Chevy and BOP transmissions
 
bop=buick olds pontiac bellhousing pattern.

mongocanfly 01-21-2020 11:24 PM

Re: Chevy and BOP transmissions
 
gotcha...never heard of bop before

Keith Seymore 01-22-2020 07:47 AM

Re: Chevy and BOP transmissions
 
1 Attachment(s)
Quote:

Originally Posted by mongocanfly (Post 8663796)
gotcha...never heard of bop before

Pronounced "Bee Oh Pee" if you ever have the opportunity.

K

Mike C 01-22-2020 08:57 AM

Re: Chevy and BOP transmissions
 
4x4 trans has a shorter main shaft than a 2x4. You can’t just add the tailhousing and make it work.

GRADYS Performance 01-22-2020 10:57 AM

Re: Chevy and BOP transmissions
 
If the BOP TH350 trans is a 2WD model the tailhousing and output shaft will fit your Chevy TH350. The transmission will have to be taken apart to change the output shaft because it is held internally by a snap ring. You could just use the BOP trans with a TCI Adapter Plate as the dowel pins and 2 of the bolt holes are the same between the 2 cases. Send Me a PM if you have any questions.

Acavet 01-22-2020 01:11 PM

Re: Chevy and BOP transmissions
 
Thank you....The transmission that came with the frame is supposedly rebuilt. I was not aware that the transmission needed to be disassembled to have a longer shaft installed. I thought the tail shaft was independent of the rest of the transmission.

I guess I’ll just sell the trans I have and buy another. I’d prefer a 400 any way.

mongocanfly 01-22-2020 02:09 PM

Re: Chevy and BOP transmissions
 
Thanks Keith..!!!...haha

GRADYS Performance 01-22-2020 02:11 PM

Re: Chevy and BOP transmissions
 
A TH400 will take a different yoke and mount than the TH350.

Quote:

Originally Posted by Acavet (Post 8664053)
Thank you....The transmission that came with the frame is supposedly rebuilt. I was not aware that the transmission needed to be disassembled to have a longer shaft installed. I thought the tail shaft was independent of the rest of the transmission.

I guess I’ll just sell the trans I have and buy another. I’d prefer a 400 any way.



All times are GMT -4. The time now is 07:06 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com