The 1947 - Present Chevrolet & GMC Truck Message Board Network - Using rubber holes for an Trans oil cooler

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Using rubber holes for an Trans oil cooler (https://67-72chevytrucks.com/vboard/showthread.php?t=801841)

jbgroby

02-26-2020 12:17 PM

Using rubber hose for an Trans oil cooler.

Is it ok to use rubber lines for oil coolers? or braided metal tubing?

vin63

02-26-2020 12:21 PM

Re: Using rubber holes for an Trans oil cooler

I usually use a minimum 300 psi-rated hydraulic hose, or hardlines.

Killer Bee

02-26-2020 01:01 PM

Re: Using rubber holes for an Trans oil cooler

this is typical of what you'll find in auto parts stores or can order online if you know the diameter and lengths you need..

TRANSMISSION OIL COOLER HOSE

hardline tubing is much hardier but requires a little more time and skill.. or can use a combination of both, really depends on application..

good luck!

DPowers

02-26-2020 09:43 PM

Re: Using rubber holes for an Trans oil cooler

1 Attachment(s)

I used braided with AN fittings.

All times are GMT -4. The time now is 04:32 AM.