The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Trans Swap (https://67-72chevytrucks.com/vboard/showthread.php?t=804337)

Jurassic-1

04-14-2020 11:02 AM

Trans Swap

What would it take to put a 1976 3 speed manual trans with column shift in a 1966 C-10 pickup . What would it take to convert it?

The Rocknrod

04-14-2020 11:21 AM

Re: Trans Swap

Well does the 66 have a straight six? If so the rear engine/trans cross member needs to come out. Likely need to install a transmission mount cross-member. Possible drive shaft length change. Column shift linkage change. Install a trans fluid cooler. I'm sure I'm missing something.

vince1

04-14-2020 08:45 PM

Re: Trans Swap

Trans fluid cooler?

The Rocknrod

04-14-2020 09:03 PM

Re: Trans Swap

Ya you guys probably call it transmission oil eh?

LostMy65

04-14-2020 09:31 PM

Re: Trans Swap

Are you guys making recommendations for an auto. I think he wants to put in a 3 speed manual.

Captainfab

04-14-2020 09:42 PM

Re: Trans Swap

A 1976 3 speed manual trans should bolt right up to your bellhousing, unless the front bearing retainer is 5-1/8" in diameter instead of 4-13/16". Not sure about the shift arms or the size of the yoke and u-joint needed.

Pitpig

04-16-2020 03:25 PM

Re: Trans Swap

Your gonna need the whole 3 speed column, shift rods, springs, etc

All times are GMT -4. The time now is 05:45 AM.