![]() |
1975 K10 Silverado with Hickey parts...Maybe
5 Attachment(s)
Just bought a 75 k10 today. It seems to have hickey parts or hickey style parts on it. Hopefully some of you guys can weigh in and let me know if you can tell by the pictures, what the parts are. Thanks Vinnie
|
Re: 1975 K10 Silverado with Hickey parts...Maybe
PS. Sorry for the sideways pictures
|
Re: 1975 K10 Silverado with Hickey parts...Maybe
Hey Vinnie. Nice truck. Yes there are several of us that collect hickey stuff. That’s what you have. A hickey grille guard with the headlight hoops. Rear saddle tanks rarer in a truck I’d say than a blazer. And maybe a transfer case guard? Any more pics?
Posted via Mobile Device |
Re: 1975 K10 Silverado with Hickey parts...Maybe
And a sidewinder winch
Posted via Mobile Device |
Re: 1975 K10 Silverado with Hickey parts...Maybe
Thanks. Right on. The sidewinder winch was the only thing I knew was Hickey, only because the handheld controls have the name on it. It has trusses on the front and rear axle but not sure if those are. I just saw a thread that talked about another company making those. I’ll try and get some more pictures up here
|
Re: 1975 K10 Silverado with Hickey parts...Maybe
5 Attachment(s)
Sorry if the pictures aren’t very clear. I was looking at the 1975 Hickey catalogue posted by a member here and the seatbelts/harnesses that I found in the truck look a little like the ones in the catalogue. One of the straps has a patch that says “DEIST”
|
Re: 1975 K10 Silverado with Hickey parts...Maybe
I’m not sure what all the options were in 75 but this one has a/c, tilt and a tach. Best of all is it’s smog exempt in California. Pretty happy about that part :)
|
Re: 1975 K10 Silverado with Hickey parts...Maybe
Nice. Trusses most likely hickey too. Con-ferr made some too. The winch controller with hickey logo is uncommon as most I’ve seen had warn replacements
Posted via Mobile Device |
Re: 1975 K10 Silverado with Hickey parts...Maybe
There’s also diamond plate screwed into the rocker panels along the bottom on both sides of the truck. I’m not a fan of it but was wondering if that was a Hickey thing too? I saw something similar in the Hickey catalogue. Thanks
|
Re: 1975 K10 Silverado with Hickey parts...Maybe
Not familiar with hickey doing diamond plate but maybe? Shoot a pic. On a side note I love your truck if you decide to sell it let me know. Really cool
Posted via Mobile Device |
Re: 1975 K10 Silverado with Hickey parts...Maybe
4 Attachment(s)
Thanks. Here is the picture of the diamond plates and the harnesses I was talking about.
|
Re: 1975 K10 Silverado with Hickey parts...Maybe
Cool. Any of that stuff you don’t want us buy. I’m doing a hickey tribute
Posted via Mobile Device |
Re: 1975 K10 Silverado with Hickey parts...Maybe
2 Attachment(s)
Here’s the diamond plate
|
Re: 1975 K10 Silverado with Hickey parts...Maybe
Awesome truck!
|
Re: 1975 K10 Silverado with Hickey parts...Maybe
Thanks brother. I’m in an ISI men’s group at my church. Great group of guys!
|
Re: 1975 K10 Silverado with Hickey parts...Maybe
2 Attachment(s)
I just saw this handy little fill hose. I wish my other car had that last week when I was filling the rear end with gear oil. I wouldn’t have had to tape a straw to the end of a plastic salad dressing bottle :)
|
Re: 1975 K10 Silverado with Hickey parts...Maybe
That's not a fill hose. That's an extended air vent so that you can drive through deep water.
|
Re: 1975 K10 Silverado with Hickey parts...Maybe
That sounds even cooler. Thanks for the info!
|
Re: 1975 K10 Silverado with Hickey parts...Maybe
2 Attachment(s)
I had a truck with this bumper compartment type. Aluminum
|
Re: 1975 K10 Silverado with Hickey parts...Maybe
5 Attachment(s)
I like that one!
I think mine is a more basic homemade version of that. |
| All times are GMT -4. The time now is 04:42 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com