The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   MO WTB 12 bolt rear housing (https://67-72chevytrucks.com/vboard/showthread.php?t=825364)

Custom 68 08-30-2021 09:24 PM

WTB 12 bolt rear housing
 
Hey all prefer local if possible I'm needing the wider 2wd 1971 1972 rear end. I really only need the housing but anything will be appreciated.
Thanks
Dave

too much stuff 08-30-2021 10:41 PM

Re: WTB 12 bolt rear housing
 
How soon do you need one?

Custom 68 08-31-2021 07:43 AM

Re: WTB 12 bolt rear housing
 
Unfortunately pretty quickly. I just confirmed I have an issue with mine I recently swapped. I'm planning on going to Cruisin the Coast in about a month so I am trying to swap it out. I have all the internals and new axles.
Thanks,
Dave

lolife99 08-31-2021 11:30 PM

Re: WTB 12 bolt rear housing
 
I assume you need a coil spring rear axle?
Don’t discount a 1970 housing.
Some of them are the like the wider 71-72 version except with 6-lug axles.

Dieselwrencher 09-01-2021 10:43 AM

Re: WTB 12 bolt rear housing
 
I have a 72 leaf spring 5 lug if that would work for ya.

Custom 68 09-01-2021 10:55 AM

Re: WTB 12 bolt rear housing
 
Thanks Keith, you are correct I wasn't sure exactly when the cutoff was. Yes it is coil spring setup but I will probably need to remove the brackets anyway to get my pinion set correctly. I had to do that on what is in there now.
Dieselwrencher, thank you I have put my feelers out here locally so I don't need to travel or ship and have a guy I need to call this morning as I believe he also has a couple to choose from. I will post in this thread and drop you a note when I have spoken to this local guy.
Again thanks all as this problem just reared its head and now I need to fix it...
Dave

Custom 68 09-03-2021 09:09 AM

Re: WTB 12 bolt rear housing
 
Thank you all for your help and input. I have found one locally. I will tear into it this weekend and make sure it will work.
I didn't have many contacts for parts around here so I was concerned I might not find anything.
Thanks,
Dave


All times are GMT -4. The time now is 05:08 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com