GMC Headlight Bezels and 3/4 Ton Control Arm Shaft and Leaf Spring Bushings
 

Buyer pays all shipping and fees

C20 Lower Control Arm Shaft - Moog K6147 - I ended up thinking I lost one of the caps and in the middle of a project I ordered a second one. Then when I moved to a new house, I found it. One cap is painted, was test fitted, then "lost." Never torqued, installed, or used. $15+shipping thread closed

C20 Leaf Spring Bushings - Moog SB319 - I learned (the hard way) that the bolt size changed some time between 1968 and 1971. These bushings were pressed in, but never used. I ended up pressing them out because the bolts I was using were bigger than these bushings. This is a full set for a Dana 60 rear end and I put anti-seize on them before pressing them in. $30+shipping SOLD

GMC Headlight Bezels - I should call this the "lessons learned" sale thread. I bought these later style headlight bezels not knowing they wouldn't fit into the 1967/8 grille. Minimal rust, super clean, no issues except for two small dings. $50+shipping thread closed

Items consolidated into another thread. This thread is closed.

Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels
 

Lower control arm shaft - Moog K6147

Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels
 

Moog SB319 Leaf Spring Bushings - I put anti-seize on them before I pressed them in

Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels
 

pics of the bezels

Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels
 

GMC Bezels

Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels
 

GMC Bezels 2

one small ding on each bezel as shown

Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels
 

bump

Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels
 

bump - prices lowered and open to reasonable offers

Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels
 

Prices dropped - help me clean out my garage!

Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels
 

pics posted, still interested?

Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels
 

-
What size is the bolt hole in the bushings.

Thanks,
LockDoc

Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels
 

Here are pics of the OD and ID. Looks like the ID is for a 9/16” bolt.

Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels
 

-
Thanks. See what the shipping would be to Montezuma, IA 50171.

LockDoc

Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels
 

I’ll work on that today/tomorrow. I also have a set of OEM door locks (no keys) I pulled off a junkyard truck. I was gonna sell them, but if you want them I’ll throw them in the box. You’ve helped me out so many times! :gmc2:

Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels
 

I’ll dig around. I might actually have two sets…

Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels
 

Sounds good. No hurry on my end.

LockDoc

Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels
 

The cheapest shipping option looks to be a small flat rate box through USPS at $9.20.

Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels
 

Sounds good. PM me your PP info.

Thanks,
LockDoc