Gas tank filler tube
 

I put a Gas tank in my truck bed. Need to fill the hole. Cut the filler tube from the old gas tank. With a new rubber for the hole, a hose clamp and the tube, The rubber went on first then slipping the tube in putting the clamp on from the back and tightening it. Well another DIY done

Re: Gas tank filler tube
 

Seems pretty simple and cheap to do. Good idea.

Re: Gas tank filler tube
 

How did you cut filler neck off tank. I wanted to do that but was afraid.

Re: Gas tank filler tube
 

Did you block the tube hate to see anything get in there specially gas

Re: Gas tank filler tube
 

Seems you have found the Only good use for an old fuel tank!

Might be able to cut it off with a large pipe cutter or a muffler cutter.

Re: Gas tank filler tube
 

Nothing New. I did this years ago. Good idea

Re: Gas tank filler tube
 

The tube came off my truck when I put a new tank in the bed. No gas was in the tank when I cut the tube I air out the tank about three weeks. Cut it with a saws all. Going to blank off the tube at the top from the inside welded

Re: Gas tank filler tube
 

x2

Re: Gas tank filler tube
 

I used a sawzall and cut it right off. Mine was dry when I did this. If you're worried about fumes, drain it, and fill with water. Cut. Drain again.