WTB Oil fill tube bolt.
 

As the title states I’m looking for a factory bolt that bolts through the manifold and has a stud sticking up for mounting the oil fill tube.

Thanks
Mark

Re: WTB Oil fill tube bolt.
 

I have several stud bolts but not sure what the needed thread and bolt depth would be. If you can supply thread size and grip length of the bolt I can check my stud bolts to see if any are correct for you need.

Re: WTB Oil fill tube bolt.
 

Since I don’t have one I cannot offer that information. But I’m sure someone here will speak up if they see this.

Thanks
Mark

Re: WTB Oil fill tube bolt.
 

Mark, sorry can't be more helpful with the correct stud bolt your looking for. I have about half a dozen of various sizes which '' might " be correct but have no information for the needed size. Hopefully someone can chime in here with the right size your needing.

Re: WTB Oil fill tube bolt.
 

Mark: here is pic. of the one on my 71. 3/8" bolt, 15/8" long, 1/4" spacer, flat washer, lock washer. Hope this helps you.

Re: WTB Oil fill tube bolt.
 

I could’ve sworn the ones I have seen for sale with the oil field tubes were a bolt with a stud sticking out of the top? I believe it was done like this so that you do not have to loosen a manifold bolt if you need to remove the oil fill tube. I do not know for sure so I’m hoping someone with more knowledge than myself will chime in.

Re: WTB Oil fill tube bolt.
 

I bought this one worked fine

Re: WTB Oil fill tube bolt.
 

They actually had some listed for 1969 to 72 Chevy small block.

Thanks
Mark