The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)

- - O-rings for factory hubs (https://67-72chevytrucks.com/vboard/showthread.php?t=841393)

Toro	01-18-2023 03:25 PM

O-rings for factory hubs

Hey, does anyone have part number for the two o-rings required inside the factory locking hub assembly? Thanks!

Ironhorse

01-18-2023 09:00 PM

Re: O-rings for factory hubs

Following along on this, would be good to know.

VictoriaHardware

01-18-2023 09:55 PM

Re: O-rings for factory hubs

1 Attachment(s)

I have some from rebuilding a '65 C10. Had to buy a bunch to get what I needed so I have a lot left over. If what you need is the same, then I can put together "kits".

72ironmike

01-21-2023 12:20 PM

Re: O-rings for factory hubs

www.torqueking.com - #'S

QU40044 - Hub O-Ring / Hub Dial O-Ring for Dana Internal Spline

QU40045 - Hub Cap O-Ring / Hub Cap (Hub Body) O-Ring

All times are GMT -4. The time now is 12:28 AM.