alternater bracket
 

Need help will stock 2005 5.3 alternater and power steering bracket fit in 1949 chevy 3100 truck with mustang 2 front end ?

Re: alternater bracket
 

Stock in what donor chassis? I'm thinking that some of them put the alternator and maybe other accessories too far out to the side and too low.

Re: alternater bracket
 

1949 chevy truck 3100 with mustang 2 front end from Chassis Engineering.

Re: alternater bracket
 

a pic says a thousand words. there is a how to thread if you are unsure

Re: alternater bracket
 

No one here can answer that question. GM had a different alternator and PS bracket for every model the 5.3 went in. High mount, low mount, left or right... Why don't you just bolt your brackets on and see what happens? Alternative is to make your own, very easy to do.

Re: alternater bracket
 

The crossmember isn't going to be an issue, Clearance with the inner fenders and space between the block and the radiator are going to be the issues. That is with just about any engine except a 216 or 235 with the 54 waterpump setup on it though.

Re: alternater bracket
 

There are a lot of variables like the height and set back of your engine. Generally the Camaro or Corvette set ups allow the most clearance for your radiator/ fan to fit. You can also use a Holley set up like this http://67-72chevytrucks.com/vboard/s...605484&page=45


I have an '04 GTO engine in my 51, it sits low so I had to relocate the alternator. It's also as tight as it can be against the firewall, so I barely have room for a fan.

Re: alternater bracket
 

Power steering pump and alternater bracket fit on 1949 chevy truck with 5.3 engine may have to modify inner fender well . Thanks for all the input.

Re: alternater bracket
 

mount the bracket and shoot us a picture.