The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Engine & Drivetrain (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=24)

- - 69 C10 with a 6l90 transmission (https://67-72chevytrucks.com/vboard/showthread.php?t=853760)

reddogg

07-28-2024 04:31 PM

69 C10 with a 6l90 transmission

1 Attachment(s)

I am looking for your help. I read a lot of posts about this swap and from what I read I just needed to cut for the high hump trans tunnel. As you can see I did that and placed the cab on the frame and you can see that the tail shaft and that 3 bolt flange are inside the cab. So what have I done wrong?

LS short box

07-28-2024 05:10 PM

Re: 69 C10 with a 6l90 transmission

What motor and trans mounts? What's the engine/trans angle?

reddogg

07-28-2024 07:58 PM

Re: 69 C10 with a 6l90 transmission

2013 Camaro LSA 6l90. Holley engine mounts and tinworks frame stiffener with trans mount I am not sure of the angle.

All times are GMT -4. The time now is 03:29 AM.