what size motor mount shims needed?
 

i just replaced newish rubber motor mounts with poly ones. my engine still sits too low. what size spacers should i try? i need to bring up the motor 1/2 to 3/4 of an inch.

Re: what size motor mount shims needed?
 

If it was low with stock mounts and poly mounts, something is not right. Maybe too high at the trans cross member?

BTW, ideally the the carb would be level, or close to it.

Re: what size motor mount shims needed?
 

As they came from the factory, shimming the motor mounts was not required.. Either those poly mounts are incorrect, or something is amiss with the frame brackets.. What are you referencing to determine correct engine height??

Re: what size motor mount shims needed?
 

Pics needed.

Re: what size motor mount shims needed?
 

I have never needed shims. Pics are definitely needed...