The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=12)
-   -   Help with Fuel Pump wiring/relay (https://67-72chevytrucks.com/vboard/showthread.php?t=856220)

GM1970s 12-27-2024 10:32 AM

Help with Fuel Pump wiring/relay
 
Just picked up this 93 this past couple weeks, finally getting around to it. Has a V6 and stick. It had a stupid alarm system on it integrated into the wiring. That’s all removed now, and noticed starter was bad and replaced as well. Just finally got around to trying to get it to start. I hear the relays go bad on these quite a bit, so I snagged one from a part store to see if anything worked. Nope. Anywho, with a test light, all the junction block wires have power, and also past the plastic links. I noticed no power on the fuel pump fuse on either side. Where do those wires(gray) end up? Does one go to the relay? Possible new relay is bad?

4u2nv 12-29-2024 07:38 AM

Re: Help with Fuel Pump wiring/relay
 
1 Attachment(s)
FP relay terminal A (ORG wire):
Should have 10 to 12 Volts DC with Key On Engine Cranking or Key On Engine Running (KOER
Does this help


All times are GMT -4. The time now is 04:04 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com