The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   20” wheels to 15” wheels (https://67-72chevytrucks.com/vboard/showthread.php?t=857935)

epfatboy 03-24-2025 03:16 PM

20” wheels to 15” wheels
 
Yep, 20” to 15” is the direction I’d like to go.
Want to do this on a 1974 C10 short bed step side. Truck has a 4” drop.
Current sneakers are 275/40R20 front and 315/30R20 rear, no rubbing. Mounted on 5x5 Riddler rims..

WITH UNKNOWN Backspace.

Anyone have some experience with what fits my combo in terms of a 15 (ish) rim, I assume a 15/10 5x5, really looking for BS (or offset) and what rubber your running on a step side.

I’m buying new so I have some option, like I might not hate the idea of a 16 or 17” rim but I do like a meaty sidewall.

I can measure, and will, just being lazy and want to window shop.

raggedjim 03-24-2025 08:15 PM

Re: 20” wheels to 15” wheels
 
Lots of choices from this thread...

https://67-72chevytrucks.com/vboard/...d.php?t=703601

Loco83 03-28-2025 01:32 PM

Re: 20” wheels to 15” wheels
 
3 Attachment(s)
15x8 and 4" BS and 15x10 with 5" BS, 245/60/15"s and 295 /50/15's.

epfatboy 03-28-2025 05:38 PM

Re: 20” wheels to 15” wheels
 
Loco,

You’re the man, that’s what I needed. Those look nice in there.

Should mention (and research) I’m running rear disc with eldo calipers pretty sure they fit 15” rims….

72c20customcamper 03-28-2025 06:02 PM

Re: 20” wheels to 15” wheels
 
Quote:

Originally Posted by epfatboy (Post 9377667)
Loco,

You’re the man, that’s what I needed. Those look nice in there.

Should mention (and research) I’m running rear disc with eldo calipers pretty sure they fit 15” rims….

I have the same setup on my Chevelle on the rear no problems with 15” inch rims .

epfatboy 03-28-2025 06:13 PM

Re: 20” wheels to 15” wheels
 
Research disc caliper to 15" rim fitment... CHECK. Thanks for that.

Richard D 04-05-2025 12:33 PM

Re: 20” wheels to 15” wheels
 
Quote:

Originally Posted by Loco83 (Post 9377628)
15x8 and 4" BS and 15x10 with 5" BS, 245/60/15"s and 295 /50/15's.

Perfect, the front is just a tiny bit shorter than the rear. I had custom truck rallys 15x10 with 5" backspace years ago, does anyone make them off the shelf?

v30crewcab 04-05-2025 06:40 PM

Re: 20” wheels to 15” wheels
 
what spindles do you have? 15" don't like 3" drop spindles.

epfatboy 04-05-2025 09:17 PM

Re: 20” wheels to 15” wheels
 
1 Attachment(s)
Not a great pic (as of today, I’m behind nothing new) but it shows the 20” wheels I’m looking to replace. Tires are 315/30R20 (27.4” tall) and 275/40R20 (28.6”).

I like the idea of 15” with:
295/60R15 ( 28.9) and 245/70R15 ( 28.4)

Little more height tire won’t hurt (4L80e/3.73) and I’ll like the extra sidewall.

I have a 2” spindle/2” spring drop front and an axle over rear.

SCOTI 04-08-2025 10:38 AM

Re: 20” wheels to 15” wheels
 
1 Attachment(s)
Standard truck ralleys are always a good choice for Squarebody trucks....

Front: 15x6.5" Van ralley; 215/75-15 tire @ 27.7"
Rear: 15x8.0" Truck ralley; 255/70-15 tire @ 29"
88-98 15" OE trim rings


All times are GMT -4. The time now is 06:07 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com