62 C10 3 Point Belts
 

Seen a lot of posts on here regarding 3 point seatbelts. Nothing too recent though.
As I look around, I keep coming back to Seatbeltplanet.
Checks alot of what Im looking for off in my list while looking.

Just curious if anyone has recently bought from them and installed their 3 point belts in a 60-63. If so, how are they? Recommended?

Thanks!!!

Re: 62 C10 3 Point Belts
 

Are there anchor points for the shoulder belts?

Re: 62 C10 3 Point Belts
 

No. Shoulders apparently didn't exist in '62.

I drilled a bolt hole, then three holes around it for plug welding, then stuck an arm up inside to attach a WIDE thick washer with a nut welded to it for a shoulder bolt.

DOT requires 7/16"UNF or 1/2"UNC for seat belt bolts. I chose UNF.

THIS was my video on doing seats and seat belts (5 min. mark). Still is my video, I guess.
.
.
.

Re: 62 C10 3 Point Belts
 

https://www.classicindustries.com/pr...713621ed466264

This what I have.

Re: 62 C10 3 Point Belts
 

Nice looking belts. Do you have any pictures of them mounted?

Re: 62 C10 3 Point Belts
 

I got mine online from Juliano's Interior Products. They included the hardware and a custom made plate for securing them to the vehicle.

Re: 62 C10 3 Point Belts
 

I used seatbeltplanet for mine. Had a plastic cover piece break on me and they sent me a new piece at no charge. Would use them again

Re: 62 C10 3 Point Belts
 

The previous owner of my truck welded nuts to the inside sheet mettle. I didn't trust it so I got a set from Juliano's and used the custom bracket.

Re: 62 C10 3 Point Belts
 

Perfect, thanks everyone as always. Let ya all know what I go with.:metal: