![]() |
72 c10 non ac heater hose lengths
I have a 1972 c10 with the standard 307/4spd.
It does NOT have AC. What is the correct length for the 5/8th's and 3/4 inch heater hoses? Thank you all and happy holidays |
Re: 72 c10 non ac heater hose lengths
Before heater hose got so expensive I just would tell them to give me 4 ft of each and trim to look right and save the stub ends. I don't have a small block in mine any more so I can't measure it and give you accurate measurements.
|
Re: 72 c10 non ac heater hose lengths
I'm going with the factory appearing heater hoses and it sells by the foot.
|
Re: 72 c10 non ac heater hose lengths
1 Attachment(s)
Top from heater box which goes to water pump = 34.75"
Bottom from heater box which goes to intake = 41". I cannot say they are original but I previously verified they follow the build manual routing. Also do not let the tape rub up against the positive terminal. |
Re: 72 c10 non ac heater hose lengths
Lmao about the tape measure, wish I would have kept the pocket knife that didn't survive the arc test on my 69 SS Camaro, took couple of weeks for the blisters/ skin to grow back
🤣 |
Re: 72 c10 non ac heater hose lengths
1 Attachment(s)
Apologies, I did some research and I gave you the wrong length. After looking through my pics, I realized mine are too long. Attached is a pic of one of the Lambrecht auction trucks during disassembly. It probably had less than a couple of hundred miles. Though I do not know the length, you can see how short they would be.
|
| All times are GMT -4. The time now is 07:48 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com