The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Corner speaker boxes (https://67-72chevytrucks.com/vboard/showthread.php?t=861926)

raidmagic

12-08-2025 02:44 PM

Corner speaker boxes

Anyone use these or ones like them? Thoughts on sound quality? Install? Do they screw in?

https://www.ebay.com/itm/28590653977...YaApNXEALw_wcB

karlbenz

12-08-2025 11:03 PM

Re: Corner speaker boxes

wouldn't open for me?

1964FarmFreshC10

12-09-2025 09:54 AM

Re: Corner speaker boxes

thats not a valid link

SkinnyG

12-09-2025 11:50 AM

Re: Corner speaker boxes

ebay item# 285906539775

1964FarmFreshC10

12-09-2025 12:02 PM

Re: Corner speaker boxes

weird still doesn't work. Just a black screen

Getter-Done

12-09-2025 12:07 PM

Re: Corner speaker boxes

Ebay links have not been working for awhile now.

Search terms : 1960-1966 Chevy Truck & GMC Cab Corner 6x9 Speaker Brackets

Seller : motorcity-sheetmetal

raidmagic

12-11-2025 12:28 PM

Re: Corner speaker boxes

Sorry guys, been busy. Not sure why the link doesn't work. They are sheet metal 6x9 holders that place the speakers on the cab corners.

https://i.ibb.co/0RHfqy2B/speaker.webp

racecougar

12-11-2025 01:36 PM

Re: Corner speaker boxes

1 Attachment(s)

I did something similar. I built speaker boxes that fit tightly into the cab corners; no drilling/screwing necessary. They sound great.

cj847

12-15-2025 08:42 PM

Re: Corner speaker boxes

I put a set in my 67. There were no instructions. So, I lined the area with sound deadener; screwed it to the back wall (2 screws). The other edge tucks under the cab weatherstrip so I didn't want to put a screw there. Instead, I put a little rtv between the joint to prevent vibration. Also stuffed the cavity with jute or other insulation. It sounds surprisingly good.
NOTE: I had the 6x9's in boxes facing up behind the seat, but after my truck spent time in paint purgatory, I found out why that's a bad idea's. Also, I'm running a 1000 watt (well that's what they claim) 4 channel amp and a powered subwoofer. In my noisy truck I don't think I could hear anything if it wasn't amplified significantly.

Chevy Fleetside

12-16-2025 10:44 AM

Re: Corner speaker boxes

For $85, I will build my own probably out of plywood. maybe 1/2"

racecougar

12-16-2025 12:39 PM

Re: Corner speaker boxes

1 Attachment(s)

Quote:

Originally Posted by cj847 (Post 9414900)

Also, I'm running a 1000 watt (well that's what they claim) 4 channel amp and a powered subwoofer. In my noisy truck I don't think I could hear anything if it wasn't amplified significantly.

Ditto. I stuck an amp under the passenger seat.

jayoldschool

12-16-2025 02:34 PM

Re: Corner speaker boxes

Quote:

Originally Posted by racecougar (Post 9414963)

Ditto. I stuck an amp under the passenger seat.

Is that the molded rubber floor? I put that in my truck as well, it made a huge difference for the in-cab sound level!

racecougar

12-16-2025 03:09 PM

Re: Corner speaker boxes

Quote:

Originally Posted by jayoldschool (Post 9414976)

Is that the molded rubber floor? I put that in my truck as well, it made a huge difference for the in-cab sound level!

It's the molded vinyl floor from stockinteriors.com (link to it below). I've been happy with it. I believe I installed it around 2016.

https://www.stockinteriors.com/moldedvinyl/13104

raidmagic

12-16-2025 09:49 PM

Re: Corner speaker boxes

Thanks for the replies.

All times are GMT -4. The time now is 09:29 PM.