The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   MO 67-72 Chevy/GMC Shortened Floor Shift Tilt Steering Column (https://67-72chevytrucks.com/vboard/showthread.php?t=862285)

Don D 01-06-2026 12:14 PM

67-72 Chevy/GMC Shortened Floor Shift Tilt Steering Column
 
5 Attachment(s)
67-72 Chevy/GMC shortened floor shift tilt steering column. The steering column was an automatic column originally & been converted to a floor shift column & shortened 2” to give you more room in the cab between the steering wheel & the seat. The column was stripped down & checked for worn or broken parts & replaced if needed. Column was painted back black & reassembled using the following new parts. Turn signal switch & wiring harness with the correct curved wire connector, lower bearing, lower bearing retainer, cancel cam/ horn contact, tilt & turn signal lever& hazard light knob.
$650.00 Plus Shipping / Payment / Postal Money Order or Personal Check
Posted via Mobile Device

CC69Rat 01-06-2026 09:21 PM

Re: 67-72 Chevy/GMC Shortened Floor Shift Tilt Steering Column
 
Any way to get an idea on shipping costs to 37343 - Hixson TN

Don D 01-06-2026 11:53 PM

Quote:

Originally Posted by CC69Rat (Post 9417549)
Any way to get an idea on shipping costs to 37343 - Hixson TN

Shipping UPS is $34.00
Posted via Mobile Device

CC69Rat 01-07-2026 07:51 PM

Re: 67-72 Chevy/GMC Shortened Floor Shift Tilt Steering Column
 
Any issues with using this in a 67, originally 6cyl 3ott. ? The steering box is from a 72 (professionally added the indentation in the frame)

I like the idea of 2" shortened and more room but just making sure it will work. If so Ill take it, it just might take me a day or two to get a money order.

davischevy 01-07-2026 09:56 PM

Re: 67-72 Chevy/GMC Shortened Floor Shift Tilt Steering Column
 
Buy with confidence. Don has built several columns for us and we are very happy.

Don D 01-07-2026 10:47 PM

Quote:

Originally Posted by CC69Rat (Post 9417670)
Any issues with using this in a 67, originally 6cyl 3ott. ? The steering box is from a 72 (professionally added the indentation in the frame)

I like the idea of 2" shortened and more room but just making sure it will work. If so I’ll take it, it just might take me a day or two to get a money order.

You will need to use the collapsible intermediate shaft from a 69-72 Chevy truck, it’s the shaft that goes from the steering box to the steering column. Other than that it will bolt right in. I will pm you with my info. tomorrow. Thanks, Don
Posted via Mobile Device

CC69Rat 01-08-2026 05:21 PM

Re: 67-72 Chevy/GMC Shortened Floor Shift Tilt Steering Column
 
Im in, no rush at all I have months before I'll need it. But I will take it. PM when you can, just let me know where to send the payment.

Thanks Don.

CC69Rat 01-12-2026 07:37 AM

Re: 67-72 Chevy/GMC Shortened Floor Shift Tilt Steering Column
 
Postal MO on the way, you should receive it ~ mid-week.

best view 01-12-2026 10:32 AM

Re: 67-72 Chevy/GMC Shortened Floor Shift Tilt Steering Column
 
Good decision :metal:

Don D 01-15-2026 07:12 PM

Quote:

Originally Posted by CC69Rat (Post 9418295)
Postal MO on the way, you should receive it ~ mid-week.

Sold to Cc69Rat.
Posted via Mobile Device


All times are GMT -4. The time now is 02:18 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com