![]() |
Headliner & Trim install
5 Attachment(s)
Installed my new headliner over the last few days.
* PUI Headliner * New trim made from the OEM molds * Velcro Started by placing masking tape on all 4 sides of both the headliner & truck roof. Held the headliner in place ( with help from my wife ) and marked the tape so we could line it back up when installing it. Cut 17" strips of velco and stuck the hook side to the roof ( about 3" in from where the edge of the headline will be ) using the indentations in the roof as guidelines . Then stuck the loop side of the velcro to the hook side and pealed the plastic barrier off . Now we carefully lined up the marks and pressed the headliner to the velcro/tape. Got it right on the 1st shot !!! The carefully installed the trim ... |
Re: Headliner & Trim install
3 Attachment(s)
More pictures .
|
Re: Headliner & Trim install
1 Attachment(s)
Looks great, I used velcro with my install too.
|
Re: Headliner & Trim install
I like how it went, no mess, no having to keep it supported until silicone or glue dried and it holds good !
Yours looks great too ! |
Re: Headliner & Trim install
very nice, ill have to remember that.
|
Re: Headliner & Trim install
Nice work.
|
Re: Headliner & Trim install
Quote:
|
| All times are GMT -4. The time now is 02:18 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com