The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)
-   -   OH 61GMC Parts 305/Hydromatic/Auto Column Dana44 Wheels (https://67-72chevytrucks.com/vboard/showthread.php?t=862590)

Jesse72 01-27-2026 01:39 PM

61GMC Parts 305/Hydromatic/Auto Column Dana44 Wheels
 
5 Attachment(s)
Hi guys selling parts from my 61 that I bought out of California. Im doing a restomod and don’t need any of this.

All this stuff can be picked up on Avon Ohio 44011. I can ship some of the smaller stuff but not the big stuff.

Motor Transmission and Column. 305/ Hydromatic with factory GMC w/ auto column. Small dent/ hole from damage in the column, I am assuming something hit it at one point. I found the broken piece inside it so it could be repaired. The column and linkage is rare. Motor and transmission are cores, have been off the road for a long time. I do not want to separate.
$800

4 Factory 15” 3 clip wheels and a 5th newer style nub wheel. I believe the 3 clip wheels are the as the 55-59 and early 60s. The hubcap style is the same. Very clean, from southern California. Tires are rollers.
$475

60-62 GMC Dana 44 I believe it to be a posi. It’s dirty and crusty, has been off the road for 40+ yr. It turns freely but I have not opened it up. Trailing arm style.
$200

Factory Trailing arms, nice shape off california truck. $200

60-62 Suburban and Panel Truck homemade hitch
$50

Jesse72 01-27-2026 01:42 PM

Re: 61GMC Parts 305/Hydromatic/Auto Column Dana44 Wheels
 
5 Attachment(s)
More pictures

bhap 01-27-2026 10:31 PM

Re: 61GMC Parts 305/Hydromatic/Auto Column Dana44 Wheels
 
Any idea what the ratio is on the Dana axle?

Jesse72 01-27-2026 11:05 PM

Re: 61GMC Parts 305/Hydromatic/Auto Column Dana44 Wheels
 
Quote:

Originally Posted by bhap (Post 9420591)
Any idea what the ratio is on the Dana axle?

I do not, it needs to be pressure washed and cleaned up but it's about 5degrees out and a foot+ of snow so i haven't gotten into it. I have read that some have a 3.54 but I cannot confirm. I do know both wheels turn when i turn the pinion so its got a posi.

MusicMan70 02-12-2026 04:04 PM

Re: 61GMC Parts 305/Hydromatic/Auto Column Dana44 Wheels
 
How much for the double groove pulley set up on the crank?

Thank you

Shipping to 92881 CA

Jesse72 02-12-2026 07:43 PM

Re: 61GMC Parts 305/Hydromatic/Auto Column Dana44 Wheels
 
Quote:

Originally Posted by MusicMan70 (Post 9422611)
How much for the double groove pulley set up on the crank?

Thank you

Shipping to 92881 CA

I am trying to keep the motor transmission and steering column all together at this point. I can let you know if I part it out.

Jesse72 02-15-2026 10:38 AM

Re: 61GMC Parts 305/Hydromatic/Auto Column Dana44 Wheels
 
2 Attachment(s)
The Dana 44 is a 3.07 posi


All times are GMT -4. The time now is 05:59 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com