PARTS AND MORE PARTs....must go!
 

Cleaning up again and need to move some of this stuff. I dont wanna move it to the new storage. All prices are plus shipping. Pics available upon request.

Also have many parts for a 1999-2002 Chevy 1/2. drivetrain, bed, front clip (might be an 03 clip, but if intersted I can find out), interior, axles, etc.


***TIRES/WHEELS***


** (3) 38.5x16x15 Swamper SXs good for spares, have little tread, $30 each

** (4) 38x15.50x15 Ground Hawg II Radials. 95% plus tread. GREAT shape. set of four $1000.

** (1) 35x12.50x15 Swamper Radial SSR. Used for spare, little tread, mounted on 6 lug steel wheel. $50

** (1)36x12.50x16 Swamper Radial, spare, little tread, $40

** (4) Stock blazer wheels with center caps and beauty rings set of four $100

** (4) 33x13.50x16 Swamper LTBs with about 75%+ tread $300

** (4) 33x14.50x15 Mickey Thompson Baja Belted about 15% $50 takes them all.


** (2) 35x12.50x16 BFG All Terrain KO's with about 90% tread $200 for the pair!



***MISC***


** HURST SHIFTER - handle and boot, great shape $25

** SUBURBAN INTERIOR TRIM - trim pieces (blue) from an 88 suburban $50

** Borla Stainless Muffler 19"x9.5" $50


** Running boards off of a K5 blazer. Diamond plate, good shape. $50/pair

** Nerf bars for 2000-ish Ford F-150 ext. cab shortbed. Chrome, good shape with scratch on bottom. $150/pair.

** Flowmaster Exhaust and Airaid Intake for 1999-2003 chevy 1/2 4.8, 5.3, 6.0. $250 for both


** Roll pan 88-99 brand new, with licens plate box. $150 shipped.

** Tail light fillers for a 88-98 chevy truck. Sir Michaels, brand new still in box. $30 shipped

** F150 stock upper and lower control arms, complete $100/set

** 1999 chevy S-10 bench seat, gray cloth, like brand new. $100

** 1999 chevy S-10 stock lenses (in grill/parking light or turn signal, cant remember ) $25/pair

** 1984 chevy S-10 rear end. 3.42 gears, good shape, complete drum to drum $150



***DRIVETRAIN***


** Vortec engine, 5.3, 4L60E, NP246 includes ALL WIRING, ALL COMPUTERS, everything you will need is there. All still hooked up and not butchered at all. Everything has under 40K on it. Still like new! Out off 2001 chevy

** 14bff, shafts, carrier, 3.73 gears, housing, hubs, drumbs,
etc.

** Rear disc brake axle from newer chevy. Great shape, like new, complete from caliper to caliper. 3.73's. open. $600

** Dana 60 front 4.56 ring, pinion, and 4.56 and up carrier. All BRAND NEW, never used, still in the original boxes. $250

** Th350 automatic, 4wd, ran great when pulled. long shaft.
$100

** 700R4/241 combo out of 1990 K5. Tranny shifts/run fine, NP241 fine, just need to replace seal on t-case. R4 shift hard in first at times. Make reasonable offer.

* REAR sway bar from a 14bff $75



***SUSPENSION***


** 4" Trailmaste lift kit for a 88-98 Chevy 1/2T truck. GREAT shape. complete with shocks, etc. Also have aluminum skid plate. $1000 obo.

** 6" Superlift kit, 3" body lift, 36" TLS Radials on Weld Super Single II's. Fits a 1999-2003 chevy 4x4. COMPLETE and in greats shape. Dual shocks, etc. EVERYTHING is there. $2300

** 3" drop kit came from 2000 F-150, belltech. coils and hangers. good shape. $100

you by any chance would have a compleat 90ish chevy or gmc would you just wondering thanks

I will take the 88-98 Taillight filler kit!
Also interested in the 88-98 rollpan. What style and material is it?

What kind of fog lights?

I have pm'd everyone with info and pics.
Let me know.

o you beat me to the taillight filler dummer

tail light fillers
 

They are still available. I had typed in the wrong price, but as I told the other party, I'd do them for $80 shipped to your door. Let me know either way if you are intersted.
Thanks and sorry for the confusion.

** Roll pan 88-99 brand new, with licens plate box. $150 shipped.

** Tail light fillers for a 88-98 chevy truck. Sir Michaels, brand new still in box. $30 shipped

pics please
duran_05@yahoo.com

Do you have a dash pad?
Thanks
Roger

14 Bolt FF Rear Sway Bar
 

Any pics available of that rear sway bar? Just like to see if it can be adapted to my 72 C-20 with the Blazer tank behind the rear. Do you have all the mounting hardware to go with it?
Thanks,
72longbed

dash pad
 

What kind of truck do you need one for?

Re: 14 Bolt FF Rear Sway Bar
 

I'll send pics of it to you email address.:D

can you send me pics of the rear sway bar also.
dins1@ncn.net

Re: dash pad
 

83-91 if it is a suburban or dually

Re: Re: dash pad
 

sorry dont have one:(

really need these parts gone:banghead:

Re: PARTS AND MORE PARTs....must go!
 

Please stop posting this, I really want it but price is a little high for me right now. :D

lift kit...
 

Sure no problem. Ask and you shall receive.

It has just been sold:D :lol:

what kind of Husrt shifter and is it a complete unit

Its just the stick and the boot. For a 4spd tranny...stick shift. Let me know if you are intersted.
Thanks.