PARTS AND MORE PARTs....must go! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

90blzr · 02-11-2004, 03:03 PM

Cleaning up again and need to move some of this stuff. I dont wanna move it to the new storage. All prices are plus shipping. Pics available upon request.

Also have many parts for a 1999-2002 Chevy 1/2. drivetrain, bed, front clip (might be an 03 clip, but if intersted I can find out), interior, axles, etc.

***TIRES/WHEELS***

** (3) 38.5x16x15 Swamper SXs good for spares, have little tread, $30 each

** (4) 38x15.50x15 Ground Hawg II Radials. 95% plus tread. GREAT shape. set of four $1000.

** (1) 35x12.50x15 Swamper Radial SSR. Used for spare, little tread, mounted on 6 lug steel wheel. $50

** (1)36x12.50x16 Swamper Radial, spare, little tread, $40

** (4) Stock blazer wheels with center caps and beauty rings set of four $100

** (4) 33x13.50x16 Swamper LTBs with about 75%+ tread $300

** (4) 33x14.50x15 Mickey Thompson Baja Belted about 15% $50 takes them all.

** (2) 35x12.50x16 BFG All Terrain KO's with about 90% tread $200 for the pair!

***MISC***

** HURST SHIFTER - handle and boot, great shape $25

** SUBURBAN INTERIOR TRIM - trim pieces (blue) from an 88 suburban $50

** Borla Stainless Muffler 19"x9.5" $50

** Running boards off of a K5 blazer. Diamond plate, good shape. $50/pair

** Nerf bars for 2000-ish Ford F-150 ext. cab shortbed. Chrome, good shape with scratch on bottom. $150/pair.

** Flowmaster Exhaust and Airaid Intake for 1999-2003 chevy 1/2 4.8, 5.3, 6.0. $250 for both

** Roll pan 88-99 brand new, with licens plate box. $150 shipped.

** Tail light fillers for a 88-98 chevy truck. Sir Michaels, brand new still in box. $30 shipped

** F150 stock upper and lower control arms, complete $100/set

** 1999 chevy S-10 bench seat, gray cloth, like brand new. $100

** 1999 chevy S-10 stock lenses (in grill/parking light or turn signal, cant remember ) $25/pair

** 1984 chevy S-10 rear end. 3.42 gears, good shape, complete drum to drum $150

***DRIVETRAIN***

** Vortec engine, 5.3, 4L60E, NP246 includes ALL WIRING, ALL COMPUTERS, everything you will need is there. All still hooked up and not butchered at all. Everything has under 40K on it. Still like new! Out off 2001 chevy

** 14bff, shafts, carrier, 3.73 gears, housing, hubs, drumbs,
etc.

** Rear disc brake axle from newer chevy. Great shape, like new, complete from caliper to caliper. 3.73's. open. $600

** Dana 60 front 4.56 ring, pinion, and 4.56 and up carrier. All BRAND NEW, never used, still in the original boxes. $250

** Th350 automatic, 4wd, ran great when pulled. long shaft.
$100

** 700R4/241 combo out of 1990 K5. Tranny shifts/run fine, NP241 fine, just need to replace seal on t-case. R4 shift hard in first at times. Make reasonable offer.

* REAR sway bar from a 14bff $75

***SUSPENSION***

** 4" Trailmaste lift kit for a 88-98 Chevy 1/2T truck. GREAT shape. complete with shocks, etc. Also have aluminum skid plate. $1000 obo.

** 6" Superlift kit, 3" body lift, 36" TLS Radials on Weld Super Single II's. Fits a 1999-2003 chevy 4x4. COMPLETE and in greats shape. Dual shocks, etc. EVERYTHING is there. $2300

** 3" drop kit came from 2000 F-150, belltech. coils and hangers. good shape. $100

bad 71 chevy · 02-11-2004, 09:19 PM

you by any chance would have a compleat 90ish chevy or gmc would you just wondering thanks

99-2door · 02-12-2004, 01:04 AM

I will take the 88-98 Taillight filler kit!
Also interested in the 88-98 rollpan. What style and material is it?

apstguy · 02-12-2004, 03:29 AM

What kind of fog lights?

90blzr · 02-12-2004, 03:36 PM

I have pm'd everyone with info and pics.
Let me know.

laidout · 02-15-2004, 09:30 PM

o you beat me to the taillight filler dummer

90blzr · 02-16-2004, 02:59 PM

They are still available. I had typed in the wrong price, but as I told the other party, I'd do them for $80 shipped to your door. Let me know either way if you are intersted.
Thanks and sorry for the confusion.

9CHEVY4 · 02-17-2004, 04:12 PM

** Roll pan 88-99 brand new, with licens plate box. $150 shipped.

** Tail light fillers for a 88-98 chevy truck. Sir Michaels, brand new still in box. $30 shipped

pics please
duran_05@yahoo.com

rogf4 · 02-17-2004, 10:01 PM

Do you have a dash pad?
Thanks
Roger

*72longbed* · 02-18-2004, 01:06 AM

Any pics available of that rear sway bar? Just like to see if it can be adapted to my 72 C-20 with the Blazer tank behind the rear. Do you have all the mounting hardware to go with it?
Thanks,
72longbed

90blzr · 02-18-2004, 02:18 PM

Quote:

Originally posted by rogf4
Do you have a dash pad?
Thanks
Roger

What kind of truck do you need one for?

90blzr · 02-18-2004, 02:18 PM

Quote:

Originally posted by 72longbed
Any pics available of that rear sway bar? Just like to see if it can be adapted to my 72 C-20 with the Blazer tank behind the rear. Do you have all the mounting hardware to go with it?
Thanks,
72longbed

I'll send pics of it to you email address.

DINS 1 · 02-18-2004, 08:26 PM

can you send me pics of the rear sway bar also.
dins1@ncn.net

rogf4 · 02-18-2004, 08:55 PM

Quote:

Originally posted by 90blzr

What kind of truck do you need one for?

83-91 if it is a suburban or dually

90blzr · 02-18-2004, 09:14 PM

Quote:

Originally posted by rogf4
83-91 if it is a suburban or dually

sorry dont have one

90blzr · 03-03-2004, 01:30 PM

really need these parts gone

cochino12 · 03-03-2004, 08:31 PM

Quote:

Originally posted by 90blzr

** 4" lift kit for 1990 K5. 4" front Rancho springs, rear blocks, steering arm,. $150.

Please stop posting this, I really want it but price is a little high for me right now.

90blzr · 03-04-2004, 01:57 PM

Sure no problem. Ask and you shall receive.

It has just been sold

Brian Ringer · 03-11-2004, 06:26 PM

what kind of Husrt shifter and is it a complete unit

90blzr · 03-11-2004, 06:39 PM

Its just the stick and the boot. For a 4spd tranny...stick shift. Let me know if you are intersted.
Thanks.

02-11-2004, 03:03 PM	#1
90blzr Registered User Join Date: Sep 2003 Location: SO. CAL. Posts: 413	PARTS AND MORE PARTs....must go! Cleaning up again and need to move some of this stuff. I dont wanna move it to the new storage. All prices are plus shipping. Pics available upon request. Also have many parts for a 1999-2002 Chevy 1/2. drivetrain, bed, front clip (might be an 03 clip, but if intersted I can find out), interior, axles, etc. *TIRES/WHEELS* (3) 38.5x16x15 Swamper SXs good for spares, have little tread, $30 each (4) 38x15.50x15 Ground Hawg II Radials. 95% plus tread. GREAT shape. set of four $1000. (1) 35x12.50x15 Swamper Radial SSR. Used for spare, little tread, mounted on 6 lug steel wheel. $50 (1)36x12.50x16 Swamper Radial, spare, little tread, $40 (4) Stock blazer wheels with center caps and beauty rings set of four $100 (4) 33x13.50x16 Swamper LTBs with about 75%+ tread $300 (4) 33x14.50x15 Mickey Thompson Baja Belted about 15% $50 takes them all. (2) 35x12.50x16 BFG All Terrain KO's with about 90% tread $200 for the pair! *MISC* HURST SHIFTER - handle and boot, great shape $25 SUBURBAN INTERIOR TRIM - trim pieces (blue) from an 88 suburban $50 Borla Stainless Muffler 19"x9.5" $50 Running boards off of a K5 blazer. Diamond plate, good shape. $50/pair Nerf bars for 2000-ish Ford F-150 ext. cab shortbed. Chrome, good shape with scratch on bottom. $150/pair. Flowmaster Exhaust and Airaid Intake for 1999-2003 chevy 1/2 4.8, 5.3, 6.0. $250 for both Roll pan 88-99 brand new, with licens plate box. $150 shipped. Tail light fillers for a 88-98 chevy truck. Sir Michaels, brand new still in box. $30 shipped F150 stock upper and lower control arms, complete $100/set 1999 chevy S-10 bench seat, gray cloth, like brand new. $100 1999 chevy S-10 stock lenses (in grill/parking light or turn signal, cant remember ) $25/pair 1984 chevy S-10 rear end. 3.42 gears, good shape, complete drum to drum $150 *DRIVETRAIN* Vortec engine, 5.3, 4L60E, NP246 includes ALL WIRING, ALL COMPUTERS, everything you will need is there. All still hooked up and not butchered at all. Everything has under 40K on it. Still like new! Out off 2001 chevy 14bff, shafts, carrier, 3.73 gears, housing, hubs, drumbs, etc. Rear disc brake axle from newer chevy. Great shape, like new, complete from caliper to caliper. 3.73's. open. $600 Dana 60 front 4.56 ring, pinion, and 4.56 and up carrier. All BRAND NEW, never used, still in the original boxes. $250 Th350 automatic, 4wd, ran great when pulled. long shaft. $100 700R4/241 combo out of 1990 K5. Tranny shifts/run fine, NP241 fine, just need to replace seal on t-case. R4 shift hard in first at times. Make reasonable offer. * REAR sway bar from a 14bff $75 *SUSPENSION* 4" Trailmaste lift kit for a 88-98 Chevy 1/2T truck. GREAT shape. complete with shocks, etc. Also have aluminum skid plate. $1000 obo. 6" Superlift kit, 3" body lift, 36" TLS Radials on Weld Super Single II's. Fits a 1999-2003 chevy 4x4. COMPLETE and in greats shape. Dual shocks, etc. EVERYTHING is there. $2300 ** 3" drop kit came from 2000 F-150, belltech. coils and hangers. good shape. $100 Last edited by 90blzr; 03-04-2004 at 01:58 PM.

02-11-2004, 09:19 PM	#2
bad 71 chevy Registered User Join Date: Jun 2000 Location: Omaha NE 68122 Posts: 637	you by any chance would have a compleat 90ish chevy or gmc would you just wondering thanks __________________ 71 Chevy C/10 lwb 350 5 speed nv3500 3.73 rear end 2.5" Front Drop and 4" in the back Edelbrock perfomer rpm manifold Edelbrock 600 cfm carb Headmen headers

02-12-2004, 01:04 AM	#3
99-2door Registered User Join Date: Oct 2003 Location: Broken Bow, OK Posts: 1,385	I will take the 88-98 Taillight filler kit! Also interested in the 88-98 rollpan. What style and material is it? __________________ 95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip

02-12-2004, 03:29 AM	#4
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	What kind of fog lights? __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

02-16-2004, 02:59 PM	#7
90blzr Registered User Join Date: Sep 2003 Location: SO. CAL. Posts: 413	tail light fillers They are still available. I had typed in the wrong price, but as I told the other party, I'd do them for $80 shipped to your door. Let me know either way if you are intersted. Thanks and sorry for the confusion.

02-12-2004, 03:36 PM	#5
90blzr Registered User Join Date: Sep 2003 Location: SO. CAL. Posts: 413	I have pm'd everyone with info and pics. Let me know.

02-15-2004, 09:30 PM	#6
laidout Active Member Join Date: Feb 2004 Location: Bartlesville,ok Posts: 275	o you beat me to the taillight filler dummer

02-17-2004, 04:12 PM	#8
9CHEVY4 Registered User Join Date: Nov 2003 Location: so cal Posts: 56	Roll pan 88-99 brand new, with licens plate box. $150 shipped. Tail light fillers for a 88-98 chevy truck. Sir Michaels, brand new still in box. $30 shipped pics please duran_05@yahoo.com __________________ http://www.geocities.com/duran_05/9chevy4.html stuff for sale http://community.webshots.com/album/105405455jtRCca

02-17-2004, 10:01 PM	#9
rogf4 Registered User Join Date: Nov 2003 Location: whitesburg,Tn Posts: 223	Do you have a dash pad? Thanks Roger

02-18-2004, 01:06 AM	#10
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	14 Bolt FF Rear Sway Bar Any pics available of that rear sway bar? Just like to see if it can be adapted to my 72 C-20 with the Blazer tank behind the rear. Do you have all the mounting hardware to go with it? Thanks, 72longbed

02-18-2004, 08:26 PM	#13
DINS 1 Registered User Join Date: Apr 2000 Location: Webster City, Iowa USA Posts: 572	can you send me pics of the rear sway bar also. dins1@ncn.net __________________ Wade "DURAMAX BURB" Burb on 2004 chevy 2500HD 4x4 Duramax chassis Long term project 2004 2500HD 4x4 crew cab GMC Duramax 4" lift 35's 79 RS Camaro

03-03-2004, 01:30 PM	#16
90blzr Registered User Join Date: Sep 2003 Location: SO. CAL. Posts: 413	really need these parts gone

03-04-2004, 01:57 PM	#18
90blzr Registered User Join Date: Sep 2003 Location: SO. CAL. Posts: 413	lift kit... Sure no problem. Ask and you shall receive. It has just been sold

03-11-2004, 06:26 PM	#19
Brian Ringer Junior Member Join Date: Dec 2003 Location: Great Salt Lake Area Posts: 78	what kind of Husrt shifter and is it a complete unit

03-11-2004, 06:39 PM	#20
90blzr Registered User Join Date: Sep 2003 Location: SO. CAL. Posts: 413	Its just the stick and the boot. For a 4spd tranny...stick shift. Let me know if you are intersted. Thanks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.