The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Did GM make a ????????????? (https://67-72chevytrucks.com/vboard/showthread.php?t=91901)

sam's 72 02-22-2004 07:28 PM

Did GM make a ?????????????
 
I was wanting to know if there is a gear ratio offered for our trucks, ( 12 BOLT ) that is in between 4.11 and 4.56? I see where there is one for a Ford nine inch. Lke a 4.33 or 4.35. Let me know??

walker 02-22-2004 07:36 PM

Try this link, the ones in red were the stock ratios the other ones were aftermarket. I would just to the Summit, or Jegs sites and see what is available.

http://my.core.com/~faldrich/axleratio.htm

lukecp 02-22-2004 07:49 PM

The lowest gear offered in a 12-bolt i n these trucks is 4.11. You can get lower gears from the aftermarket and have them swapped in.

BTW Walker, that link you posted is for the passenger car 12-bolt, which is quite different that the truck 12-bolt. Many more ratios were offered for the car version, and i hear it is stronger too.

sam's 72 02-22-2004 07:53 PM

It don't have to be GM SORRY I am wondering if this gear is available for our trucks 4.33 or 4.35

dinnut 02-22-2004 09:22 PM

you can always swap a ford nine inch into your truck with that gear ratio in it. same bolt pattern. some modifications required though.


All times are GMT -4. The time now is 12:54 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com