The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

turmoline · 07-02-2002, 12:04 AM

I just did this yesterday. Bubba green is right you'll have to notch the support so they fit. If you drill the spot welds out from the bottom the old ones just fall out and you can weld the new ones in where you drilled the holes at.

07-02-2002, 12:04 AM	#7
turmoline Registered User Join Date: Jul 2001 Location: santa cruz, Calif. U.S. Posts: 166	I just did this yesterday. Bubba green is right you'll have to notch the support so they fit. If you drill the spot welds out from the bottom the old ones just fall out and you can weld the new ones in where you drilled the holes at.