The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**pjmoreland** · 08-04-2005, 01:58 PM

If you don't have the key, you can pop the sheetmetal faceplate off the front of the tumbler, and drill a 3/16" hole into the tumbler to the left of the key slot. Drill at a slight angle so that the hole breaks through the left side of the tumbler. You can access the locking mechanism with a small screwdriver.

08-04-2005, 01:58 PM	#3
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,241	If you don't have the key, you can pop the sheetmetal faceplate off the front of the tumbler, and drill a 3/16" hole into the tumbler to the left of the key slot. Drill at a slight angle so that the hole breaks through the left side of the tumbler. You can access the locking mechanism with a small screwdriver.