The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

JimKshortstep4x4 · 12-27-2005, 05:35 AM

If the clip and lower bearing is removed the tube can be driven out using a 1" X 3" board driven against the lower shift lever.

I looked into making a tool but it would have to be pretty precise as the wall thickness is very thin. I never had any that would not come out using a piece of wood (having rebuilt dozens of this type of tilt).

Jim

12-27-2005, 05:35 AM	#6
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: 72 tilt column If the clip and lower bearing is removed the tube can be driven out using a 1" X 3" board driven against the lower shift lever. I looked into making a tool but it would have to be pretty precise as the wall thickness is very thin. I never had any that would not come out using a piece of wood (having rebuilt dozens of this type of tilt). Jim