The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - How to install or remove the funny looking fasteners?

johnnyp · 03-15-2006, 04:41 PM

Hard to explain - easy to do. Just twist the clip so it's wedged under the lips of the bezel/trim. The little springy thing keeps it from twisting back out. Then just slide the clip where it will line up with the hole and push it in (or if it has a screw stud, install the nut on the back.

Just play around with it, until it looks right.

03-15-2006, 04:41 PM	#3
johnnyp Keepin' It Stock Join Date: Aug 2001 Location: Grand Island, Nebraska, USA Posts: 554	Re: How to install or remove the funny looking fasteners? Hard to explain - easy to do. Just twist the clip so it's wedged under the lips of the bezel/trim. The little springy thing keeps it from twisting back out. Then just slide the clip where it will line up with the hole and push it in (or if it has a screw stud, install the nut on the back. Just play around with it, until it looks right. __________________ 72 Sierra Grande - Maych Forget about "do it right the first time". Do it wrong the first time to learn how, then do it right the second time.