The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Progress pics

**71swb4x4** · 06-18-2006, 11:46 PM

www.hoseandfittings.com
Funny you posted tonight, I was going to update this old thread.

I had play with the crossmember bulkhead fittings, I cut some pipe at an angle so I could get the fitting to point at the bag a little straighter. I have everything plumbed now. Sometime next week I hope to pressurize the system so I can start chasing down any leaks that I may have.
I still have to try to figure out how to mount my York compressor to the passenger side.
I also have to finish the wiring.
Slowly but surely!

06-18-2006, 11:46 PM	#34
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	Re: Progress pics - air system, not far...yet www.hoseandfittings.com Funny you posted tonight, I was going to update this old thread. I had play with the crossmember bulkhead fittings, I cut some pipe at an angle so I could get the fitting to point at the bag a little straighter. I have everything plumbed now. Sometime next week I hope to pressurize the system so I can start chasing down any leaks that I may have. I still have to try to figure out how to mount my York compressor to the passenger side. I also have to finish the wiring. Slowly but surely! __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.