Progress pics - air system, not far...yet - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71swb4x4** · 06-18-2006, 11:46 PM

www.hoseandfittings.com
Funny you posted tonight, I was going to update this old thread.

I had play with the crossmember bulkhead fittings, I cut some pipe at an angle so I could get the fitting to point at the bag a little straighter. I have everything plumbed now. Sometime next week I hope to pressurize the system so I can start chasing down any leaks that I may have.
I still have to try to figure out how to mount my York compressor to the passenger side.
I also have to finish the wiring.
Slowly but surely!

06-18-2006, 11:46 PM	#1
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	Re: Progress pics - air system, not far...yet www.hoseandfittings.com Funny you posted tonight, I was going to update this old thread. I had play with the crossmember bulkhead fittings, I cut some pipe at an angle so I could get the fitting to point at the bag a little straighter. I have everything plumbed now. Sometime next week I hope to pressurize the system so I can start chasing down any leaks that I may have. I still have to try to figure out how to mount my York compressor to the passenger side. I also have to finish the wiring. Slowly but surely! __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.