The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

PanelDeland · 12-27-2006, 05:25 PM

I think Billla has hit the most pertinent points.I would suggest you get and read the books he suggested and use that info to help define your expectations.I see the ones listed by Vizard at Barnes and Noble but if you don't have a B&N they can be found at www.motorbooksinternational.com
The assembly manual may be a bit tougher but MBI should have the Haynes and Chiltons also.You are probably looking at about $20.00 each but the info will be in your library from now on.

12-27-2006, 05:25 PM	#7
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: SBC 350 rebuild information I think Billla has hit the most pertinent points.I would suggest you get and read the books he suggested and use that info to help define your expectations.I see the ones listed by Vizard at Barnes and Noble but if you don't have a B&N they can be found at www.motorbooksinternational.com The assembly manual may be a bit tougher but MBI should have the Haynes and Chiltons also.You are probably looking at about $20.00 each but the info will be in your library from now on. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"