The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

hardline_42 · 08-20-2007, 05:31 PM

I'm a big fan of Hooker Super Comp headers but even a lowly set of Summit brand long tubes will get you gains. If you have the tools, you can get a cheap set of painted headers, blast them clean, coat them with Anti-Seize (yes, Anti-Seize) and heat cycle them a couple of times. Spray the inside with a couple cans of VHT Hi-Temp ceramic white paint and you have a low buck alternative to ceramic coating. Also, the 3-wire O2 sensor is a good idea and only a little more expensive than the standard ones.

08-20-2007, 05:31 PM	#6
hardline_42 Registered User Join Date: Nov 2006 Location: Englishtown, NJ Posts: 27	Re: Anyone with Vortec heads and headers? I'm a big fan of Hooker Super Comp headers but even a lowly set of Summit brand long tubes will get you gains. If you have the tools, you can get a cheap set of painted headers, blast them clean, coat them with Anti-Seize (yes, Anti-Seize) and heat cycle them a couple of times. Spray the inside with a couple cans of VHT Hi-Temp ceramic white paint and you have a low buck alternative to ceramic coating. Also, the 3-wire O2 sensor is a good idea and only a little more expensive than the standard ones.