Quote:
Originally Posted by STL_66 Chevy
i finally got a chance to work on the door tonight... and i got it open.
i ended up loosening the bolts that hold the strike plate from the inside of the cab... not an easy task! i got the bolts loose enough that the door just popped opened. i looked at the assembly and the strike plate and couldnt see anything wrong with it.. i guess if you didnt have the those unwanted demons your not doing it right!
thanks everyone for your input and advise
|
check the wear pattern on all of the pieces that will tell you whats up. you blame it on gremlins and it will do it again. here is a trick i learned: clean up the latch and striker with layout blueing and check where the dye has been rubbed off and adjust as needed.
