The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

JimKshortstep4x4 · 01-22-2008, 06:53 AM

I used the beaded material plus a good Ureathane sealer in making sure it would not leak between the fender and bedside. Although it does not leak, I am dreading the day when I have to remove a fender as it will probably be stuck.

If I had it to do over, I would go with a good layer of 3M strip caulk without the beaded material.

Jim

01-22-2008, 06:53 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: stepside fender attachment? I used the beaded material plus a good Ureathane sealer in making sure it would not leak between the fender and bedside. Although it does not leak, I am dreading the day when I have to remove a fender as it will probably be stuck. If I had it to do over, I would go with a good layer of 3M strip caulk without the beaded material. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC Last edited by JimKshortstep4x4; 01-22-2008 at 06:54 AM. Reason: wording