The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jiggs · 01-19-2003, 03:25 PM

Matt; I made new brackets from square tubing, drilled the holes for the U-bolts and capped the ends with flat bar. I also cut the half circle out of the tubing for the axle to fit into then welded it to the axle. The panhard bar I am going to make from scratch using 1" seamless pipe, schedule 80. I will make the brackets out of 1/4" steel. I am going to mount the one end on the trailing arm and the other new bracket on the oposite side frame rail.

01-19-2003, 03:25 PM	#3
jiggs poker face Join Date: Jul 2002 Location: Saskatoon, Saskatchewan Posts: 218	Matt; I made new brackets from square tubing, drilled the holes for the U-bolts and capped the ends with flat bar. I also cut the half circle out of the tubing for the axle to fit into then welded it to the axle. The panhard bar I am going to make from scratch using 1" seamless pipe, schedule 80. I will make the brackets out of 1/4" steel. I am going to mount the one end on the trailing arm and the other new bracket on the oposite side frame rail. __________________ If you could kick the person in the *ss responsible for most of your trouble, you wouldn't sit for a month.