|
Re: window seals and fuzzys
Quote:
Originally Posted by JimKshortstep4x4
I do the anti rattle strips last.
The vertical seal on the vent window frame is done with the frame out and is glued in with trim adhesive.
The window seal can be glued also, as sometimes it will move if you don't glue it.
Jim
|
I did the other side as you suggested and was able to trim the anti-rattle strips to fit and it went a whole lot better in this order.
__________________
69 K-20 cloned to a 67 with front clip and some other stuff.
383 .040 over
Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears: 
|