[lolife99]

Started the weekend by dropping the front of my blazer down another inch. I always thought the front sat a little too high. So I was going to pull out my Belltech 2" drop springs and replace them with my 3" Ground Force (Summit brand) drop springs that I had laying around. When I got them side by side, the Ground force Springs were already 2 inches shorter. I know when I installed the 2" Belltech springs and 2.5" ECE drop spindles,... my drop equalled roughly 4.5 inches total. So to make a long story short,... I cut 1/2 coil off my Belltech springs and reinstalled them. I gained 1 1/8" of additional drop. Has anyone ever install the 3" Summit brand springs and got over 3" of drop? Here's a few before and after pics,...