The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

rchdrm · 03-01-2009, 07:39 PM

The pedal rod support is the triangular plastic piece bolted to the engine side of the firewall. It supports the rod that runs from the back of the gas pedal to the linkage on the carburator.

Not looking to buy a used one just wanting to know if they are still available?

LMC, Classic parts, Early classic did not have them on their web sites or in the catalogs.
This may be a special part that has to be manufactured at a machine shop.

03-01-2009, 07:39 PM	#3
rchdrm The start of the $ pit! Join Date: Jul 2005 Location: garland, Tx Posts: 153	Re: Gas pedal rod support for 68 The pedal rod support is the triangular plastic piece bolted to the engine side of the firewall. It supports the rod that runs from the back of the gas pedal to the linkage on the carburator. Not looking to buy a used one just wanting to know if they are still available? LMC, Classic parts, Early classic did not have them on their web sites or in the catalogs. This may be a special part that has to be manufactured at a machine shop.