The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Rokcrln · 03-16-2009, 07:17 AM

Your gas tank is a 25 Gal and if you want you can get a sending unit out of an 87-91 25 Gal tank that is set up for EFI. This gives you the fittings for an in tank pump for the 5.3L motor. You will need to get the correct PSI pump for your motor but it will all snap together and you end up with a factory in tank pump set up and have the correct sending unit for your fuel gauge. I will try and find the right part numbers for the sending unit and pump. PM me if you need them and then you can post it up if you want.
I used this same tank in my LowBuck truck build as well as LFD's 4 door Tahoe build. Search for info on mounting and what not.

Kevin
LFD Inc.

03-16-2009, 07:17 AM	#12
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Project Black Hole For Money Your gas tank is a 25 Gal and if you want you can get a sending unit out of an 87-91 25 Gal tank that is set up for EFI. This gives you the fittings for an in tank pump for the 5.3L motor. You will need to get the correct PSI pump for your motor but it will all snap together and you end up with a factory in tank pump set up and have the correct sending unit for your fuel gauge. I will try and find the right part numbers for the sending unit and pump. PM me if you need them and then you can post it up if you want. I used this same tank in my LowBuck truck build as well as LFD's 4 door Tahoe build. Search for info on mounting and what not. Kevin LFD Inc. Last edited by Rokcrln; 03-16-2009 at 07:19 AM.