Project Black Hole For Money - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rokcrln · 03-16-2009, 07:17 AM

Your gas tank is a 25 Gal and if you want you can get a sending unit out of an 87-91 25 Gal tank that is set up for EFI. This gives you the fittings for an in tank pump for the 5.3L motor. You will need to get the correct PSI pump for your motor but it will all snap together and you end up with a factory in tank pump set up and have the correct sending unit for your fuel gauge. I will try and find the right part numbers for the sending unit and pump. PM me if you need them and then you can post it up if you want.
I used this same tank in my LowBuck truck build as well as LFD's 4 door Tahoe build. Search for info on mounting and what not.

Kevin
LFD Inc.

Prathbun · 03-16-2009, 12:07 PM

Quote:

Originally Posted by Rokcrln

Your gas tank is a 25 Gal and if you want you can get a sending unit out of an 87-91 25 Gal tank that is set up for EFI. This gives you the fittings for an in tank pump for the 5.3L motor. You will need to get the correct PSI pump for your motor but it will all snap together and you end up with a factory in tank pump set up and have the correct sending unit for your fuel gauge. I will try and find the right part numbers for the sending unit and pump. PM me if you need them and then you can post it up if you want.
I used this same tank in my LowBuck truck build as well as LFD's 4 door Tahoe build. Search for info on mounting and what not.

Kevin
LFD Inc.

Wow!!!! Thanks Kevin!!! That's great information, I look forward to you PM

Prathbun · 07-01-2009, 07:55 PM

Had a good shop day today. I installed a PS box (easy) and started to mock up my blazer tank install. For my tank, I had to remove 2 rear frame braces so the tank and skid plate would fit. Check out the pics and give me some feedback. I think I'm on the right track but I really don't know.

Thanks

Prathbun · 07-01-2009, 07:56 PM

More Blazer tank pics.

Prathbun · 07-01-2009, 08:00 PM

Also did some U-bolt measurements.

Go here:
http://67-72chevytrucks.com/vboard/s...d.php?t=346995

03-16-2009, 07:17 AM	#1
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Project Black Hole For Money Your gas tank is a 25 Gal and if you want you can get a sending unit out of an 87-91 25 Gal tank that is set up for EFI. This gives you the fittings for an in tank pump for the 5.3L motor. You will need to get the correct PSI pump for your motor but it will all snap together and you end up with a factory in tank pump set up and have the correct sending unit for your fuel gauge. I will try and find the right part numbers for the sending unit and pump. PM me if you need them and then you can post it up if you want. I used this same tank in my LowBuck truck build as well as LFD's 4 door Tahoe build. Search for info on mounting and what not. Kevin LFD Inc. Last edited by Rokcrln; 03-16-2009 at 07:19 AM.

07-01-2009, 07:55 PM	#3
Prathbun Registered User Join Date: Jul 2007 Location: Poplar Bluff, MO 63901 Posts: 293	Re: Project Black Hole For Money Had a good shop day today. I installed a PS box (easy) and started to mock up my blazer tank install. For my tank, I had to remove 2 rear frame braces so the tank and skid plate would fit. Check out the pics and give me some feedback. I think I'm on the right track but I really don't know. Thanks Attached Images __________________ It's Not Rust, It's Patina!! 1967 C 20 Large Window, 700R4, 283, Tilt, PS, PB.....A Rusty But Trusty Gas Hog 2008 Silverado LTZ 1500 4x4

07-01-2009, 07:56 PM	#4
Prathbun Registered User Join Date: Jul 2007 Location: Poplar Bluff, MO 63901 Posts: 293	Re: Project Black Hole For Money More Blazer tank pics. Attached Images __________________ It's Not Rust, It's Patina!! 1967 C 20 Large Window, 700R4, 283, Tilt, PS, PB.....A Rusty But Trusty Gas Hog 2008 Silverado LTZ 1500 4x4

07-01-2009, 08:00 PM	#5
Prathbun Registered User Join Date: Jul 2007 Location: Poplar Bluff, MO 63901 Posts: 293	Re: Project Black Hole For Money Also did some U-bolt measurements. Go here: http://67-72chevytrucks.com/vboard/s...d.php?t=346995 __________________ It's Not Rust, It's Patina!! 1967 C 20 Large Window, 700R4, 283, Tilt, PS, PB.....A Rusty But Trusty Gas Hog 2008 Silverado LTZ 1500 4x4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.