The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

maddog1331 · 07-06-2009, 09:22 AM

Make sure the speedometer cable is really connected....you can screw it on there but it might not be seated. If I recall correctly you should be able to feel it go in place before you screw it in, try rotating it while pushing in a bit when you install it. Again if I recall correctly, you can look at the middle part of the cable end and see that the point has a flat side (maybe 2?) or some such...that has to match up to the hookup.

07-06-2009, 09:22 AM	#2
maddog1331 Registered User Join Date: Feb 2009 Location: Somerset, KY Posts: 398	Re: Speedo Problems Make sure the speedometer cable is really connected....you can screw it on there but it might not be seated. If I recall correctly you should be able to feel it go in place before you screw it in, try rotating it while pushing in a bit when you install it. Again if I recall correctly, you can look at the middle part of the cable end and see that the point has a flat side (maybe 2?) or some such...that has to match up to the hookup.