08-11-2009, 12:50 AM
|
#6
|
|
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,254
|
Re: 72 power steering on 63 frame adapter plates?
Email sent.....thanks 
Quote:
Originally Posted by Eagar1
I sent you an e-mail, I have the tools and ability to build them myself, just not the time, no sense wasting time I need to spend on other issues. I am sure once I get the parts it will be self explanitory. I may need to rustle up a push rod for the brakes or make one. I have the pitman arm on the 75 steer box. I am sure I can use that, and I will drill the holes for the idler arm once I have the geometry from the box. I am dropping a 350 and a 4speed out of an 81 chevy, should bolt right up to the motor mount plates I got from the 72, as it was a 350 4-speed. My 63 was a 6 cyl, 3speed, is why I changed out the complete crossmember, so I had the heavier springs and the reinforcement plates for the upper bolts, and 8 lug discs, I plan on being able to haul and tow with it.
Thanks, and I look forward to your e-mail.
Ron
|
|
|
|